TỔNG QUAN

TÍNH NĂNG

THÔNG SỐ KỸ THUẬT

Bộ Giải Mã DAC Không Dây Bluetooth Audioengine B1 DAC với chip giải mã cao cấp AKM AK4396A DAC upsampling 24bit DAC tương thích với các nguồn âm thanh có độ phân giải lên đến 24-bit. – Sử dụng giao tiếp Bluetooth 5.0 chuẩn atpX HD cao cấp nhất, B1 có thể đọc bất kỳ file nhạc số nào kể cả lossless và giữ nguyên chất lượng khi truyền dẫn không dây. – Audioengine B1 cũng được trang bị một cổng optical trong trường hợp bạn muốn nâng cấp DAC trong tương lai.

Xem thêm

Tính năng Technical Features Supports all Bluetooth-enabled devices High-fidelity Bluetooth with aptX transmission and extended range Stream high-resolution 24-bit digital audio from the Audioengine B1 to any music system. Includes built-in AKM4396 DAC for superior 24-bit upsampled playback Aluminum case with audiophile-grade connectors Analog and optical outputs 2.0Vrms maximum output level Experience stunning audio quality with aptX HD coding, built-in 24-bit upsampling DAC, and extended wireless range. DAC Characteristics The B1 Bluetooth Receiver utilizes the AKM AK4396A DAC, widely known for its low noise and high fidelity. B1 is essentially an upsampling 24-bit Bluetooth DAC and will pad all bit depths internally to 24-bits, thus achieving a higher signal-to-noise ratio. Due to the AK4396A’s high signal-to-noise specs, the fact that the digital signal is converted (upsampled) to 24-bits and the added benefit of triple redundancy power source conversion and filtering, the B1 presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices. Extended Range Most Bluetooth implementations have very limited range, usually within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that will reach more than one room with no degradation in audio quality. High quality Bluetooth audio The B1 features aptX HD coding which is an advanced Bluetooth audio codec that provides much higher-quality sound than previous versions. The B1 is backwards-compatible with all previous Bluetooth implementations as well, so you can wirelessly stream music from any device and still enjoy outstanding sound. Optical Output B1 also functions as a wireless audio bridge from your device to your favorite DAC or preamp. Use the internal DAC with RCA analog outputs or connect the optical output into another DAC.

Kỹ thuật

Bluetooth receiver type
Bluetooth 5.0 audio

Supported Bluetooth codecs
aptX HD, aptX low latency, aptX, AAC, SBC

Supported Bluetooth profiles
A2DP, AVRCP

Inputs
Bluetooth

Outputs
Stereo analog RCA
Digital optical (SPDIF)

Required power
5V, 200mA

Operation range
up to 100ft (30m) typical

Full-scale output
2.0V RMS

Output impedance
57 Ohms

D/A converter
AKM AK4396

Power filtering
3-stage redundant regulation

SNR
SNR (DC to 20 kHz)
100dB

THD+N
(1 kHz FS 96 kS/s) <0.02%

Frequency response
10Hz – 20kHz (+/-0.5dB)

Crosstalk
>-86dB

Input bit depth
24-bit (upsampled)

Input data rate
Determined by Bluetooth

Latency
~30 milliseconds (ms)

Audioengine B1

4.900.000 

Sản Phẩm Mới

FiiO

FiiO CP13

2.690.000 2.990.000 

TEAC

TEAC TN-400BT-X

12.900.000 

FiiO

FiiO SP3BT

9.490.000 

FiiO

FiiO R9

39.990.000 

FiiO M23 Stainless Steel

23.990.000 

Klipsch

Klipsch The One Plus

7.330.000 

TEAC

TEAC TN-180BT-A3

5.500.000 

phone-icon