TỔNG QUAN

SupaQuasar by iFi audio
 

Welcome the SupaQuasar

Geometrically balanced endgame active power cable

 
 
 

Endgame

The SupaQuasar is an endgame power cable for your audio setup.

It has no shielding to minimise capacitance, extremely low resistance to maximum current delivery, and is specifically designed for large amplifiers.

Featuring our Active Noise Cancellation 2 technology, it actively eliminates noise across all frequency ranges across live, neutral and earth. Plus the SupaQuasar active power cable is truly geometrically balanced, a first in the world of power cables.

Ground Zero

Using iFi’s unique Ground Zero design technology, the SupaQuasar active power cable creates a central core that is free of any magnetic fields.

The non-twisted central ground wire is surrounded by the live and the neutral conductors as a geometrically-balanced pair double helix which protects the ground wire from any magnetic field. No induction voltage is created in the ground wire and therefore system ground noise is vastly reduced.

 

Balanced.

Each individual power line has concurrent shielding, so both internal and external RFI noises are minimised.

Low inductance, low capacitance and constant impedance are achieved for the entire cable by the use of the double helix power lines. Constant impedance is achieved regardless of whether the cable is bent or angled, thanks to the fully symmetric and balanced geometric design.

The cable is insulated using a polymer matrix, which is comprised of a high-performing thermoplastic that is moisture-resistant and is RoHS compliant.

Continuing the true balanced theme, the cable uses air-dielectric delineation to give the best separation possible between the two balanced pairs of live & neutral conductors.

SupaQuasar by iFi audio

Leading the way…

  • Heavy OFHC continuous cast copper
  • Polymer casing for lasting durability for excellent conductivity
  • Concurrent shield for each power line for minimization of internal and external RFI noise
  • Polymer matrix is unaffected by moisture, amorphous, dimensional accuracy, low dielectric constant
  • Air-dielectric delineator, best separation between balanced pairs of live and neutral
  • Shotgun ground line non-twisting design significantly reduce ground loop noises
 

Copper. Gold.

iFi uses the purest copper core to ensure excellent conductivity and our plugs are gold-plated with copper connectors to guarantee the best possible connection.

Finally, the SupaQuasar active power cable is finished in an impact resistant polymer casing for long-lasting durability

 

Most power-conditioning products engage passive noise reduction through a selection of filters and regulators. While this can be effective, it has inherent disadvantages. Passive noise reduction systems are effective at the top end of the frequency spectrum but often less so at lower frequencies. In addition, passive systems need large capacitors to be truly effective, which make the best such products bulky and expensive.

iFi’s active system uses inverse noise current to cancel out the noise in the mains signal. Noise in the mains supply occurs at different frequencies, depending on the cause. Active Noise Cancellation II technology enables a power-conditioning device that is highly effective at reducing noise consistently across the entire frequency spectrum yet sufficiently compact and lightweight to position within the mains cable itself.

Our Ground Zero design ensures the grounding conductor within the cable is unaffected by residual magnetism and unwanted induced voltage.

The constant impedance design helps to maintain the purity of the mains electricity flowing into each piece of equipment in an audio system or an AV set-up.

This is a true balanced power cable.

Using true geometrically balanced pairs means that the magnetic fields caused by the live and neutral conductors cancel each other out perfectly. This is a key component in the Ground Zero design.

Double circular helix power line design with air-dielectric delineators.

This twisted configuration further aids RFI/EMI rejection.

The cable design incorporates concurrent shielding for individual power lines and therefore creates a cable offering constant impedance, that is superbly insulated from EMI/RFI and feeds your audio or AV system with clean electricity for improved sound and performance.

Xem thêm

Nội dung đang cập nhật!

Nội dung đang cập nhật!

iFi SupaQuasar

21.000.000 

Sản Phẩm Mới

FiiO

FiiO CP13

2.690.000 2.990.000 

Audio Technica

Audio Technica AT-LP70XBT

7.944.000 9.930.000 

TEAC

TEAC TN-400BT-X

12.900.000 

FiiO

FiiO SP3BT

9.490.000 

FiiO

FiiO R9

39.990.000 

FiiO M23 Stainless Steel

23.990.000 

Pro-Ject Audio

Pro-Ject Phono Box E

2.064.000 

Klipsch

Klipsch The One Plus

7.500.000 

TEAC

TEAC TN-180BT-A3

4.500.000 

phone-icon