32.900.000 ₫
Bảo hành 12 tháng
Còn hàng
TỔNG QUAN
THÔNG SỐ KỸ THUẬT
Ferrum Hypsos defines a brand new category of a hifi products. It’s not a simple power supply but an audio component of its own – an equally (or even more) important part of a setup as any other. HYPSOS offers a selection of unique features and even accounts for future software improvements – the device is software controlled with as few hardware dependent elements as possible. The most important features are:
Linear/switching hybrid design to get the advantages from both techniques – low ripple and noise as well as fast transient response and high efficiency.
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous ouput voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal – special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable’s resistance effectively improving transient response.
Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection.
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
Unique output cable design: two wires delivering the power and two wires providing the feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable’s resistance effectively improving transient response. The current delivery speed at the powered device’s input is significantly improved.
Xem thêm
Nội dung đang cập nhật!
Output Voltage Range: 5-30 V Max Continuous Output Current (< 13.3 V): 6 A Max Continuous Output Power (> 13.3 V): 80 W Maximum Impulse Current: 9 A Maximum Impulse Power: 270 W for 30 V Primary Winding Fuse: IEC 5x20mm, 250V 3.15A Secondary Winding Fuse: Littefuse 154004T, 4A Dimensions (WDH): 8.6″ x 8.1″ x 2″ (217.5 x 206.5 x 50 cm) Weigth: 6.2 lb (2.89 kg) |
32.900.000 ₫
Sản Phẩm Mới
Sản phẩm đã xem
Copyright © 2022 Vinylsaigon. All rights reserved.
